The Deformation of an Elastic Substrate by a Three-Phase Contact Line E. R. Jerison

From Soft-Matter
Revision as of 01:26, 4 October 2011 by Smagkir (Talk | contribs)

Jump to: navigation, search


The authors study in detail the contact line around a droplet of water deposited on a gel and surrounded by air. Such a droplet experiences forces due to the three different interfaces: the solid-vapor surface tension, the solid-liquid surface tension, and the liquid-vapor surface tension. In equilibrium, all forces must be balanced. The lateral components of all surface tensions are balanced when the droplet relaxes in its steady-state shape, characterized by a contact angle between it and the solid such that the solid-liquid and solid-vapor tension equal the liquid-vapor tension. However, the liquid-vapor tension has also a component perpendicular to the solid substrate. While it is reasonable to speculate that this force is balanced somehow by an elastic deformation of the solid, an attempt to calculate the magnitude of these forces with pre-existing theories led to pathological results, since relevant quantities such as the vertical component of the liquid-vapor surface tension diverged at the contact line. Existing theories on this system either have avoided this regime, or introduce reasonable cutoffs but do not agree with experimental observation.

Three-phase contact.PNG

To address this lack of understanding, the authors have observed the elastic deformation of a gel solid under a droplet of water in air and developed a linear elastic theory which describes their observations well for displacements out of the plane of the solid substrate. The deformations of the solid were observed by embedding fluorescent beads in the gel at two planes, the interfacial one and 3μm below it, and monitoring their position with microscopy in the presence and absence of the drop. Their observations are recorded in Figure 2.

In previous work, the authors have solved the linearized displacement equation for an isotropic elastic solid of finite thickness. An infinite thickness solution had been presented before by Boussinesq, which however predicted a divergence of the displacement at infinite distances from the contact angle; introducing a finite thickness in the problem prevents this divergence and provides a more physical result. To this equation they have now additionally incorporated a term that accounts for the energy cost due the creation of additional surface area when the solid is deformed; this amendment resolves an additional peculiarity of the Boussinesq solution, which was associated with the stress in the solid at the contact line. The solution of this newly presented equation provides a theoretical prediction for the displacement profile of the gel substrate around the contact line in the directions tangential to the contact line and perpendicularly to the solid interface. The agreement between this calculation and data on the perpendicular displacement is excellent; deviations from the behavior of the system in the tangential direction are still noticeable. Pinning of the droplet on the gel surface and viscous drag near the contact line are two factors that might account for this discrepancy.