Surface-Tension-Induced Synthesis of Complex Particles Using Confined Polymeric Fluids

From Soft-Matter
Revision as of 23:01, 26 November 2011 by Padstamongkonkul (Talk | contribs)

Jump to: navigation, search

Entry by Pichet Adstamongkonkul, AP 225, Fall 2011


Title: Surface-Tension-Induced Synthesis of Complex Particles Using Confined Polymeric Fluids

Authors: Chang-Hyung Choi, Jinkee Lee, Kisun Yoon, Anubhav Tripathi, Howard A. Stone, David A. Weitz, and Chang-Soo Lee

Journal: Angewandte Chemie International Edition, 2010, Vol. 49, No. 42


There are attempts to manipulate the physical and chemical properties of polymeric particles to optimize their functions and applications. Conventional approaches include self-assembly, photolithography, stretching/deformation of spherical particles, microfluidics, and nonwetting template molding. However, more complex shapes are also more difficult to handle in a controlled manner. This paper demonstrates a novel method for synthesizing monodisperse particles with a variety of shapes and sizes via "surface-tension-induced flow". The authors loaded two solutions, a photocurable solution (polyethylene glycol diacrylate; PEG-DA) and a nonphotocurable wetting solution (n-hexadecane), into a micromold. By changing the loading sequence of the two solutions, one can form particles with different curvatures and aspect ratio through different contacting interfaces between soltuions, micromold wall surface, and air. Eventually, the photocurable solution is polymerized using UV light.

Advantages and Limitations of the Conventional Methods

Most current methods are limited to two-dimensional or spherical shapes, since the more complex shapes are harder to handle.

  • Bottom-up approaches
    • Based on self-assembly mechanisms such as
      • Liposome preparation
      • Heterogeneous polymerization
      • Colloid synthesis
    • Difficult to manipulate to control morphology and structure
  • Top-down approaches
    • Such as Photolithography
    • Inherently limited by the availability of materials - photolithography is not compatible with organic materials as the technique involves using harsh solvent in wet etching, high energy in ion etching, high-temperature baking, multiple steps for layers removal, and strong energy deposition.
  • Microfluidic platforms
    • Allows the formation of spherical, disks, plugs, rods according to the microchannels or photomask geometries and flow conditions
    • Several limitations
      • Fast solidification without deformation and channel adhesion are required
      • Morphologies of particles are limited by the channel or photomask geometries
  • Particle Replication In Nonwetting Templates (PRINT)
    • Developed to fabricate monodisperse particles with a wide range of size and shape
    • Reproducible and easy processing
    • A variety of materials can be used
    • Still difficult to produce three-dimensional shapes

Surface-Tension-Induced Flow Methodology