Multi-photon lithography

From Soft-Matter
Revision as of 16:30, 6 December 2011 by Grant (Talk | contribs)

Jump to: navigation, search

Entry chosen by Grant England

Mpl2.jpg

Multiphoton lithography involves any process which requires more than one photon for photochemical activation. Since the reaction (usually photopolymerization requires more than one photon to be present in the same location in order for it to occur, the probability of this occurring is only large enough near the focal point of a scanning laser beam which is used to three-dimensionally write the material. Also, for this to happen at an arbitrary volume in the photoresist, the material must be optically transparent to the laser light used for illumination.

Methods for large area patterning using multiphoton lithography have been developed by using conformal phase masks [1], but these are currently limited to periodic structures such as 3D Photonic crystals, and cannot produce structures with arbitrary geometries.

Example structures which can be created using multiphoton lithography (Maruo, S. and Fourkas, J. (2008), Recent progress in multiphoton microfabrication. Laser & Photonics Reviews, 2: 100–111. doi: 10.1002/lpor.200710039)

Wikipedia stub: [2]

Keyword in references:

Direct Writing and Actuation of Three-Dimensionally Patterned Hydrogel Pads on Micropillar Supports