Micromanipulation of biological cells using a microelectromagnet matrix

From Soft-Matter
Revision as of 13:36, 13 September 2010 by Sbhandar (Talk | contribs) (Summary)

Jump to: navigation, search

Original entry by Sagar Bhandari, APPHY 225 Fall 2010


H. Lee, A.M. Purdon, R.M. Westervelt, "Manipulation of Biological Cells using a Microelectromagnet Matrix", Applied Physics Letters 85, 1063 (2004).


cells, microelectromagnet, manipulation


In this paper, the authors demonstrate the noninvasive manipulation of biological cells by microelectromagnetic matrix created using optical lithography. An array of straight wires aligned perpendicular to each other are created on a Si/SiO2 substrate. As shown in Fig. 1, the array of conducting wires is covered with an insulating layer (made of bisbenzocyclobutene (BCB)), to prevent electrical shorting between wires. To control the flow of solution containing cells, a microfluidic channel was separately fabricated with poly(dimethylsiloxane) (PDMS) using soft lithography13 and sealed over the surface of the microelectromagnet matrix.

Figure 1:

Sagar wiki1 image2.jpg

Yeast cells were attached to magnetic beads by having the surface of the magnetic bead functionalized with Concanavalin–A, a lectin that specifically binds to sugar molecules15 (a-D-mannose) on the yeast cell’s surface with a binding force of approximately 100 pN.Strong and localized magnetic field can be created by applying current to the wires. A large force F,40 pN can be exerted on the bead as shown in Fig. 2. Cells attached to magnetic beads, therefore, can be stably trapped and moved by the matrix at room temperature.

Figure 2:

Sagar wiki1 image3.jpg

Figure 3:

Sagar wiki1 image1.jpg

Soft matter connection