High-throughput injection with microfluidics using picoinjectors
A. R. Abate, T. Hung, P. Mary, J. J. Agresti, and D. A. Weitz
"High-throughput injection with microfluidics using picoinjectors"
PNAS 107, 19163-19166 (2010).
Entry by Meredith Duffy, AP 225, Fall 2011
Microfluidics-based research requires manipulation of fluid volumes on a sub-microliter scale. Although this can prove advantageous for maximizing efficiency and throughput of assays, measuring and especially combining such small quantities with accuracy can prove difficult. The authors present a technique for adding multiple reagents to droplets in microchannels with sub-picoliter accuracy by taking advantage of a two-phase system with electrically induced thin-film instabilities.
This "picoinjector" technique provides advantages over current standards such as T-junctions and electro-coalescence. T-junction devices fail for stable emulsions, whose surfactant surface denies the reagent entry into the drop. Electro-coalescence, in which an electric field is used to merge the droplet with the reagent droplet in flow, is effective for one reagent but fails when trying to add multiple reagents in sequence, due to the difficulties of synchronizing multiple droplet streams. The picoinjector, conversely, can inject controlled quantities of reagent into surfactant-lined drops and can be placed in series with more picoinjectors to allow the independent addition of as many reagents as needed.
Methods and Results
The switching rate of the injector is limited not by the electrodes but by the detection of droplets to 10 kHz. Similarly, the accuracy of the system is limited by optical resolution to 0.1 pL, due to their system of quantifying reagent added by calculating the change in drop volume (modeling the drops as cylinders with hemispherical ends).
The authors also demonstrate that several picoinjectors, each on the scale of a few hundred microns, can be placed side-by-side along the same channel and activated independently, allowing