Grooving of a grain boundary by evaporation-condensation processes: Surface evolution below the roughening transition.

From Soft-Matter
Revision as of 22:14, 7 November 2009 by Borkin (Talk | contribs)

Jump to: navigation, search

Original Entry by Michelle Borkin, AP225 Fall 2009


Grooving of a grain boundary by evaporation-condensation processes: Surface evolution below the roughening transition.

H.A. Stone, M. Aziz and D. Margetis, J. Appl. Phys. 97, 113535-1-6, 2005


grain boundary, solid–vapor interface, evaporation–condensation, thermodynamic roughening


Schematic diagram.
Figure 1: Schematic diagram of the evolution of a grain boundary.

This paper's focus is understanding and mathematically defining how grooves form at grain boundaries at the intersection of a planar surface. This is important in describing grain growth of thin films since the deepening of grain boundary grooves along the surface will set the boundaries resulting in slower grain growth. The specific condition studied here is how these grooves evolve when below the thermodynamic roughening transition by evaporation–condensation processes. Also, the case examined is a solid–vapor interface. It turns out the dynamics are governed by a nonlinear partial differential equation and the groove profile is defined by a nonlinear ordinary differential equation. This groove profile is important since the slope determines the driving force for how much grain growth is required for the boundary to break free of the groove. Both numerical and approximate analytical solutions are presented and agree with each other: the grooves' width and depth vary as <math>t^{1/2}</math> where <math>t</math> is time. Having such mathematical descriptions are useful for comparing to experiments in order to extract estimates for surface diffusion coefficients and determining features of the surface energy.

Soft Matter

Table of results.

The theoretical description of this grain boundary evolution focuses on studying the surface free energy. (This has traditionally been tricky since there is a singularity in the surface free energy at the edge of the facet.) Defining the surface free energy of the solid–vapor interface as <math>\gamma</math> and the grain boundary free energy as <math>\gamma_{b}</math>, then the most energetically favorable position is for the groove to form at the grain boundary when <math>\gamma_{b} < 2\gamma</math> thus the angle <math>2\theta</math> is dictated by <math>\gamma_{b} / 2\gamma = cos(\theta)</math>.

The evolution of the groove over time, where <math>h(t)</math> is the one-dimensional groove profile, is defined by the following nonlinear PDE: <math></math>

Currently writing...