Difference between revisions of "Granular discharge and clogging for tilted hoppers"

From Soft-Matter
Jump to: navigation, search
(Summary)
(Summary)
Line 11: Line 11:
 
In this paper, the authors study the behavior of spherical glass beads when passed through a small hole and the diameter and tilt angle - dependence of the flow rate. They also study the condition for zero flux /clogging in terms of hole diameter and tilt angle.  
 
In this paper, the authors study the behavior of spherical glass beads when passed through a small hole and the diameter and tilt angle - dependence of the flow rate. They also study the condition for zero flux /clogging in terms of hole diameter and tilt angle.  
  
The authors use granular medium consisting of spherical glass beads, with two different diameters: d = 0.30 ± 0.05 mm and d = 0.9 ± 0.1 mm. Both have bulk density of 1.53±0.01 g/cubic cm. and draining angle of repose of 24 degrees. As a medium to pass the bead through, two different containers are used.  
+
The authors use granular medium consisting of spherical glass beads, with two different diameters: d = 0.30 ± 0.05 mm and d = 0.9 ± 0.1 mm. Both have bulk density of 1.53±0.01 g/cubic cm. and draining angle of repose of 24 degrees. As a medium to pass the bead through, two different containers are used - steel can and aluminum square tube. Holes are drilled in three different locations: in the bottom at center, in the bottom at 2 cm from the side, and in the side at 2 cm above the bottom.
  
 
  Figure 1:
 
  Figure 1:

Revision as of 23:13, 10 November 2010

Original entry by Sagar Bhandari, APPHY 225 Fall 2010

Reference

Granular discharge and clogging for tilted hoppers, Hannah G. Sheldon and D. J. Durian, Granular Matter,Volume 12, Number 6, 579-585

Keywords

tilted hoppers, glass beads, granular discharge, clogging

Summary

In this paper, the authors study the behavior of spherical glass beads when passed through a small hole and the diameter and tilt angle - dependence of the flow rate. They also study the condition for zero flux /clogging in terms of hole diameter and tilt angle.

The authors use granular medium consisting of spherical glass beads, with two different diameters: d = 0.30 ± 0.05 mm and d = 0.9 ± 0.1 mm. Both have bulk density of 1.53±0.01 g/cubic cm. and draining angle of repose of 24 degrees. As a medium to pass the bead through, two different containers are used - steel can and aluminum square tube. Holes are drilled in three different locations: in the bottom at center, in the bottom at 2 cm from the side, and in the side at 2 cm above the bottom.

Figure 1:
Sagar wiki7 image1.jpg


Figure 2:

Sagar wiki7 image2.jpg