Difference between revisions of "Electrostatics"

From Soft-Matter
Jump to: navigation, search
(Charges and electric fields)
(Keyword in references:)
(One intermediate revision by the same user not shown)
Line 155: Line 155:
(3) http://en.wikipedia.org/wiki/Agarose_gel_electrophoresis
(3) http://en.wikipedia.org/wiki/Agarose_gel_electrophoresis
== Keyword in references: ==
[["Folding of Electrostatically Charged Beads-on-a-String: An Experimental Realization of a Theoretical Model", Reches, M., Snyder, P.W., and Whitesides, G.M., Proc. Natl. Acad. Sci. USA, 2009, 106, 17644-17649.]]
[[Mechanism of nanostructure movement under an electron beam and its application in patterning]]

Latest revision as of 04:49, 3 December 2011

Back to Topics.

What is electrostatics?

Electrostatics is the branch of science that deals with the phenomena arising from what seems to be stationary electric charges.

Since classical antiquity it was known that some materials such as amber attract light particles after rubbing. The Greek word for amber, ήλεκτρον (electron), was the source of the word 'electricity'. Electrostatic phenomena arise from the forces that electric charges exert on each other. Such forces are described by Coulomb's law. Even though electrostatically induced forces seem to be rather weak, the electrostatic force between e.g an electron and a proton, that together make up a hydrogen atom, is about 40 orders of magnitude stronger than the gravitational force acting between them.

Electrostatic phenomena include examples as simple as the attraction of plastic wrap to your hand after you remove it from a package, to the apparently spontaneous explosion of grain silos, to damage of electronic components during manufacturing, to the operation of photocopiers. Electrostatics involves the buildup of charge on the surface of objects due to contact with other surfaces. Although charge exchange happens whenever any two surfaces contact and separate, the effects of charge exchange are usually only noticed when at least one of the surfaces has a high resistance to electrical flow. This is because the charges that transfer to or from the highly resistive surface are more or less trapped there for a long enough time for their effects to be observed. These charges then remain on the object until they either bleed off to ground or are quickly neutralized by a discharge: e.g., the familiar phenomenon of a static 'shock' is caused by the neutralization of charge built up in the body from contact with nonconductive surfaces.


The following examples are taken from an excellent book on electrostatics:

J.M. Crowley, Fundamentals of applied electrostatics, Wiley & Sons, 1986

Volts, fields, charges


Biological Cells

Comparison of action potentials (APs) from a representative cross-section of animals-Theodore Holmes Bullock, 1965 "Structure and Function in the Nervous Systems of Invertebrates."
Animal Cell type Resting potential (mV) AP increase (mV) AP duration (ms) Conduction speed (m/s)
Squid (Loligo) Giant axon −60 120 0.75 35
Earthworm (Lumbricus) Median giant fiber −70 100 1.0 30
Cockroach (Periplaneta) Giant fiber −70 80–104 0.4 10
Frog (Rana) sciatic nerve axon −60 to −80 110–130 1.0 7–30
Cat (Felis) Spinal motor neuron −55 to −80 80–110 1–1.5 30–120

Charged surfaces are very important in biological systems since all nerve cells use gradients of ions in cellular communication.

      • Side Note*** Connection to previous topic: A liquid crystal bilayer is very very important in the function of nerve cells. Cell membranes are liquid crystal bilayers and because of their structure and local charge they are practically impervious to ions! Without this the body would not beable to build up gradients in ions to activate communication throughout the body.

Cable Theory View of Neuron Communication


Electrical response in axons of nerve cells can be mathematically described using cable theory generated by Lord Kelvin in 1855 for modeling the transatlantic telegraph cable. An axon can be approximated as an "electrically passive, perfectly cylindrical transmission cable" described by the following differential equation:

<math> \tau \frac{\partial V}{\partial t} = \lambda^{2} \frac{\partial^{2} V}{\partial x^{2}} - V </math>

where V(x, t) is the voltage across the membrane at a time t and a position x along the length of the neuron, and where λ and τ are the characteristic length and time scales on which those voltages decay in response to a stimulus.

Referring to the circuit diagram above, these scales can be determined from the resistances and capacitances per unit length

<math> \tau =\ r_{m} c_{m} </math>

<math> \lambda = \sqrt \frac{r_m}{r_l} </math>

"These time- and length-scales can be used to understand the dependence of the conduction velocity on the diameter of the neuron in unmyelinated fibers. For example, the time-scale τ increases with both the membrane resistance rm and capacitance cm. As the capacitance increases, more charge must be transferred to produce a given transmembrane voltage as the resistance increases, less charge is transferred per unit time, making the equilibration slower. Similarly, if the internal resistance per unit length ri is lower in one axon than in another (e.g., because the radius of the former is larger), the spatial decay length λ becomes longer and the conduction velocity of an action potential should increase. If the transmembrane resistance rm is increased, that lowers the average "leakage" current across the membrane, likewise causing λ to become longer, increasing the conduction velocity."

For many more references see original compilation here.[1]

Top of Page

Voltages and electric fields

Electric force is conservative. (Even in Massachusetts.) <math>\oint{qE\cdot dr}=0=\nabla \times E</math>
Crowley Fig. 1.1.1

<math>\oint{E\cdot dr}=\int\limits_{-\text{terninal}}^{+\text{terminal}}{E\cdot dr+}\int\limits_{\text{wires}}^{{}}{E\cdot dr+}\int\limits_{\text{gap}}^{{}}{E\cdot dr}=0</math>

<math>v=\int\limits_{\text{+ terninal}}^{\text{- terminal}}{E\cdot dr}=Ed</math>

Top of Page

Charges and electric fields

Gauss’s law:

<math>\oint\limits_{S}{D\cdot dA}=\oint\limits_{S}{\varepsilon E\cdot dA}=q</math>

D = displacement

dA = area vector

S = surface

<math>\varepsilon </math> = dielectric constant

E = Electric field

q = charge

Another form is:


 & \nabla \cdot D=\rho  \\ 
& \nabla \cdot E=\frac{\rho }{\varepsilon } \\ 


(when the dielectric constant is constant!)

Crowley Fig. 1.2.1
<math>D=\frac{q}{4\pi r^{2}}\,\!</math>
Crowley Fig. 1.2.2
<math>\left( D_{a} \right)_{norm}-\left( D_{b} \right)_{norm}=\frac{q}{A}\equiv \rho _{s}\,\!</math>

Gel Electrophoresis

These ideas are applied in gel electrophoresis to separate DNA, RNA, or protein molecules. Electrophoresis is the "motion of dispersed particles relative to a fluid under the influence of an electric field that is space uniform" (1) In 1807 Reuss discovered it when he saw clay particles suspended in water move when an electric field was applied.

In molecular biology, agarose gel electrophoresis is used to separate the molecules by size. The negatively charged molecules are moved through the agarose matrix via an electic field. As shorter molecules move faster than longer, they are quickly separated out by size. The image below shows the procedure for running an agarose gel. The key point relevant to this section is the role of the field to move the charged particles. The molecules move toward the positive anode when the current is applied. (note that DNA and RNA are negatively charged due the phosphate backbone)

This works because the particles in the fluid carry the electric surface charge. The application of the electric field exerts an electrostatic Coulomb force on the molecules through these charges. Recent Electrophoresis occurs because particles dispersed in a fluid almost always carry an electric surface charge. An electric field exerts electrostatic Coulomb force on the particles through these charges. Recent molecular dynamics simulations, though, suggest that surface charge is not always necessary for electrophoresis and that even neutral particles can show electrophoresis due to the specific molecular structure of waterer at the interface.[9]

Electrophoresis process

The most known and widely used theory of electrophoresis was developed by Smoluchowski in 1903 and applies to uniformly charged particles.


where ε is the dielectric constant of the dispersion medium, ε0 is the permittivity of free space (C² N-1 m-2), η is dynamic viscosity of the dispersion medium (Pa s), and ζ is zeta potential (i.e., the electrokinetic potential of the slipping plane in the double layer).

(1) http://en.wikipedia.org/wiki/Electrophoresis

(2) http://en.wikipedia.org/wiki/Gel_electrophoresis

(3) http://en.wikipedia.org/wiki/Agarose_gel_electrophoresis

Keyword in references:

"Folding of Electrostatically Charged Beads-on-a-String: An Experimental Realization of a Theoretical Model", Reches, M., Snyder, P.W., and Whitesides, G.M., Proc. Natl. Acad. Sci. USA, 2009, 106, 17644-17649.

Mechanism of nanostructure movement under an electron beam and its application in patterning

Top of Page

Back to Topics.