Difference between revisions of "Double Emulsion-Templated Nanoparticle Colloidosomes with Selective Permeability"

From Soft-Matter
Jump to: navigation, search
(Summary)
Line 8: Line 8:
  
 
==Summary==
 
==Summary==
 +
In this paper, the authors demonstrate that nanoparticle colloidosomes with selective permeability can be prepared from monodisperse double emulsions as templates instead of using the conventional water-in-oil emulsion. The monodisperse water-in-oil-in-water double emulsions with a core shell geometry are prepared using glass capillary microfluidic devices. Hydrophobic silica nanoparticles are used to create the colloidosome shells by dispersing them in the oil shell and  after stabilization removing the oil solvent. The size of the colloidosomes can be controlled since the size of emulsions dimension can be precisely tuned by independently controlling the flow rates of each fluid phase. Their microfluidic device combines a flow focusing and coflowing geometry as shown in Fig 1 (a). This kind of geometry results in hydrodynamic flow focusing of three different fluid streams at the orifice of the collection tube and leads to the formation of double emulsions. Silicon nano partciles are used in oil phase to stabilize the double emulsion. After the nanoparticle stabilized double emulsions are collected, the oil phase is removed by evaporation, leading to the formation of nanoparticle colloidosomes through dense packing of nanoparticles as shown in Figure 1(b).The double emulsions so generated are very monodisperse as evidenced by the hexagonal close packing of the drops, illustrated by optical and fluorescence microscopy images in Figure 1(c) and (d),respectively.
 +
 
Figure 1:
 
Figure 1:
 
[[Image:sagar_wiki3_image1.jpg|thumb|800px|none|center]]
 
[[Image:sagar_wiki3_image1.jpg|thumb|800px|none|center]]

Revision as of 01:58, 4 October 2010

Original entry by Sagar Bhandari, APPHY 225 Fall 2010

Reference

Double Emulsion-Templated Nanoparticle Colloidosomes with Selective Permeability, Daeyeon Lee, David A. Weitz , Advanced Materials Volume 20, Issue 18, pages 3498–3503, September 17, 2008

Keywords

emulsion, nanoparticles, colloidosomes, permeability

Summary

In this paper, the authors demonstrate that nanoparticle colloidosomes with selective permeability can be prepared from monodisperse double emulsions as templates instead of using the conventional water-in-oil emulsion. The monodisperse water-in-oil-in-water double emulsions with a core shell geometry are prepared using glass capillary microfluidic devices. Hydrophobic silica nanoparticles are used to create the colloidosome shells by dispersing them in the oil shell and after stabilization removing the oil solvent. The size of the colloidosomes can be controlled since the size of emulsions dimension can be precisely tuned by independently controlling the flow rates of each fluid phase. Their microfluidic device combines a flow focusing and coflowing geometry as shown in Fig 1 (a). This kind of geometry results in hydrodynamic flow focusing of three different fluid streams at the orifice of the collection tube and leads to the formation of double emulsions. Silicon nano partciles are used in oil phase to stabilize the double emulsion. After the nanoparticle stabilized double emulsions are collected, the oil phase is removed by evaporation, leading to the formation of nanoparticle colloidosomes through dense packing of nanoparticles as shown in Figure 1(b).The double emulsions so generated are very monodisperse as evidenced by the hexagonal close packing of the drops, illustrated by optical and fluorescence microscopy images in Figure 1(c) and (d),respectively.

Figure 1:

Sagar wiki3 image1.jpg