Controlled Switching of the Wetting Behavior of Biomimetic Surfaces with Hydrogel-Supported Nanostructures

From Soft-Matter
Revision as of 19:31, 16 February 2009 by Stsai (Talk | contribs)

Jump to: navigation, search

By Lidiya Mishchenko

In this paper, Aizenberg et. al. utilized nanopost arrays to allow structures to switch between wetting and non-wetting states (superhydrophobic and not). These arrays (as synthesized) are silicon nanostructures with high aspect ratio features. When coated with a hydrophobic silane, they demonstrate superhydrophobicity (through coupling of high contact angle and structure). The behavior of a device that switches from nonwetting to wetting in a humid environment was called "direct response" and one that switches from wetting to non-wetting in a humid environment was called "reverse response" (See captions).

Direct Response: Nanposts attached to substrate. During dry state, we have cassie a state (superhydrophobic) because the posts are covered with a hydrophobic silane and the hydrogel is not in contact with the droplet. During the wet state, the hydrogel swells and the water droplet comes into contact with the hydrophillic hydrogel, allowing wetting.
Reverse Response: Nanoposts embedded in hydrogel but not attached to substrate. During drying, hydrogel contracts and tilts posts, allowing for wetting (breaking the Cassie state). When hydrogel is wet, the nanoposts point straight up (restoring the Cassie state hydrophobicity).

A large portion of the paper focused on creating a hydrogel layer that was anchored properly to the substrate and could reversibly switch for many cycles.

Some interesting ideas in the paper:

- Hydrogels were defined as "responsive materials composed of cross-linked flexible polymeric hydrophillic chains whore elastic networks can swell in water to the desired degree of hydration"

-They noted that hydrogels are "shape-memory" polymers and this allows for the repeatability of the process. Also noted was that hydrogels respond to a variety of stimuli: humidity, pH, etc.

-In their intro, they gave a nice definition of superhydrophobicity: "a very high water droplet contact angle and a very small advancing-receding hysteresis... a water droplet deposited on a superhydrophobic surface maintains its almost spherical shape and easily slides over the surface"

-The bio-inspiration for responsive superhydrophobic structures comes from: legs of water spiders and beetles. They use nanostructured hydrophobicity for "water repellence, movement, and water capture"

-Finally, they mentioned another paper that demonstrates (for block copolymer coatings) "water-induced increase of superhydrophobicity of the polymer coatings...caused by the dynamic rearrangement of the flourinated polymer segments" [[1]] Makal, U. and, Kenneth J. Wynne. Water Induced Hydrophobic Surface. Langmuir 2005 21 (9), 3742-3745

Don's comments: What silane was used to make the surface hydrophobic? How does the contact angle of water on a flat surface
treated with this silane compare to water on the superhydrophobic array?

By Scott Tsai


In this paper, Sidorenko et al demonstrated a hybrid system of rigid nanostructures with responsive hydrogel films to create a superhydrophobic-hydrophilic switch. They demonstrate this for two cases. The first case is for a "direct response", where the unactuated state of the system is superhydrophobic, and the second case is for a "reverse response", where the unactuated state of the system is hydrophilic.

Hybrid System of Si Nanostructured Surface and Hydrogel Layer

Fig.1 A SEM photograph of the Si structures and B what a droplet of water looks like as it sits on the nanostructured surface
Krupenkin et al had recently fabricated Si nanostructures that were coated with a hydrophobic coating. The result was what the authors termed "superhydrophobicity", where water that was placed on the surface displayed very high contact angles and very small contact line hysteresis [1].

Here, the authors have attemped to combine the Si nanostructed surface with a layer of hydrogel. They were inspired to do so by a number of biological materials, such as a gecko's toe [2]. To integrate the hydrogel layer to the Si nanostructured surface, a bottom-up layering approach was applied. The process involved layering PGMA on the Si substrate, immersing the surface acrylic acid, and initiating the polymerization with either UV light or thermoinitiator.

Direct Response and Indirect Response Systems

Fig.2 The "direct response" system is superhydrophobic when the hydrogel is in its "dry state" and hydrophilic when the hydrogel is in its "wet state"
The direct response system involves the integration of a thick hydrogel layer into a nanostructured surface. As shown in Fig.2, when the hydrogel is in a "dry state", all of the features of the nanostructured layer stick up, and cause a pendent drop of water to show almost spherical shape, displaying superhydrophobicity. But when the hydrogel is in its "wet state", it swells, causing the drop of water to wet the surface.

Fig.3 The "reverse response" system is hydrophilic when the hydrogel is in its "dry state" and superhydrophobic when the hydrogel is in its "wet state"
The reverse response system is essentially the same as the direct response system, but reversed. As shown in Fig.3, the nanostructured pillars are inserted into the hydrogel, and the surface is broken off from the pillars so that the pillars remain in the hydrogel. Thus, when the hydrogel is in its "dry state", the pillars collapse, and when the hydrogel is in its "wet state", the hydrogel swells and pushes the pillars away from each other and causes them to become upright.
Sung Hoon's comments: It's very interesting study that the authors could switch the wetting
behavior of the surface using humidity. Is there any other study which showed switching of
wetting by stimuli other than humidity? 
Don's comments: When a drop of water was placed on the surface with the hydrogel
in the dry state, did the hydrogel eventually absorb the drop and switch to
the wet state?  Could this be used as a humidity sensor of some sort?
Scott's comments: Yes, there are a number of other studies on the switching of wetting behavior. 
One very popular method is switching by EWOD (electrowetting-on-dielectric). Refer to "Equilibrium
behavior of sessile drops under surface tension, applied external fields, and material variations" by 
Shapiro and Kim. Another method is called optoelectrowetting, which does the same thing (lowers surface 

In the "reverse response" case, I think it may be possible for the drop to contact the surface, wet the   
surface, and then cause the hydrogel to swell and the surface to become hydrophobic. The "direct response" 
case probably would not do this because the drop would just sit on top of the pillars and not wet the   
surface to swell the hydrogel. This could definitely be a humidity sensor. The authors also talked about 
the "reverse response" being able to act like "smart clothes", which are able to attract moisture when it 
is dry and repel water when it is exposed to a humid environment. 


1. T. Krupenkin, J. A. Taylor, T. M. Schneider and S. Yang, Langmuir, 2004, 20, 3824-3827

2. K. Autumn, M. Sitti, Y. A. Liang, A. M. Peattie, W. R. Hansen, S. Sponberg, T. W. Kenny, R. Fearing, J. N. Israelachvili and R. J. Full, Proc. Natl. Acad. Sci. U. S. A., 2002, 99, 12252-12256