Control of Shape and Size of Nanopillar Assembly by Adhesion-Mediated Elastocapillary Interaction

From Soft-Matter
Revision as of 17:08, 18 September 2011 by Daniel (Talk | contribs)

Jump to: navigation, search

Introduction

Traditionally, chemistry involves the synthesis of new molecules: precursor molecules are mixed together in the right conditions (provided by the chemists) and the desired molecules will be produced without further, direct human intervention. This molecular synthesis is so accomplished as an art and technology that it can make virtually any target molecules. [1] The interesting and logical question to ask if such a self-assembly is possible for structures in the micro- and nano-scale, and what the constraints of such self assembly is. A major difference between classical molecular synthesis and self-assembly in the nano-/micro- scale is that while the former involves covalent bonds, the latter are often driven by surface forces whose strengths are of the order of KBT.

The work by Kang et al shows just how such the self-assembly of nanopillars are influenced by a combination of such surface forces. Previous studies have assumed that the self-assembly of micro- and nano-pillars are the results of competition between elasticity and capillarity, but Kung et al shows that adhesion has to be taken into account as well.

JA18 1.png

Figure 1. Left, Effect of the pillar modulus on the size and pattern of assembled clusters. (a-c) SEM images of assembly of fiber array with different moduli (E): (a) E ~ 400 MPa, (b) E ~ 1 GPa, (c) E ~ 2.4 GPa. The diameter and the length of the fibers were fixed to 250 nm and 8 μm, respectively. The scale bars are 20 μm. The insets show high-magnification images of the assemblies, which were used to check the onset of the chirality for each condition. Right, Effect of the plasma treatment on the size and pattern of assembled clusters. (a-c) SEM images of assembly of post arrays with different plasma treatment time. The plasma treatment increases adhesion as well as decreases the diameter of the nanopillars. (a) No plasma treatment (control); (b) 1 min plasma treatment; (c) 2 min plasma treatment. The modulus and the height of the pillars were fixed at 1 GPa and 8 μm, respectively. The scale bars are 20 μm. The insets show the high-magnification images used for determining the shape of individual clusters.

JA18 2.png

Figure 2. Effect of the anisotropy on the size and pattern of assembled clusters. Left column shows schematics (not drawn to scale) of the method used to fabricate various nanopillar arrays, and right column shows SEM images of the assemblies of corresponding nanopillar arrays. The insets show the high-magnification image of the corresponding SEM image. (a) Elliptical cross section nanopillars (h ~ 8 μm) arranged into a rectangular lattice assemble into anisotropic clusters elongated in the direction of the short axis if the ellipse (scale bar: 50 μm). The long axis indicates the direction in which the tensile force was applied. The inset shows the elliptical cross section of the posts (scale bar: 1 μm). (b) Square array of cylindrical nanopillars oriented perpendicular to the surface assemble into a regular array of tetramers. (c) Pillars tilted along a lattice direction form a regular array of achiral dimers instead of tetramers. (d) Pillars tilted slightly off a diagonal lattice direction form chiral dimers with a uniform twisting direction. Scale bars: 10 μm.

JA18 3.png

Figure 3. Schematic diagrams depicting the mechanisms of the assembly process. (a) Possible routes of the assembly and disassembly processes that determine the final pattern. C and A indicate the capillary force and the adhesion force, respectively. E is the elastic force, and the subscripts I, II, III, and IV indicate the hierarchy of the assembly. Note that while the interplay between the elastic and capillary force determines the maximum size the assembly can reach while wet, the adhesion force determines stability of the formed clusters and the size and shape of the final product. (b) Dif- ferent shapes of the assembled clusters. The nanopillars first attached at the tips and, depending on the adhesion force between the pillars, can either undergo a slippage and chiral rearrangement leading to twisted clusters for low adhesion or zip down the nanopillars for high adhesion values.

References

1. G.M. Whitesides and M. Boncheva, "Beyond molecules: Self-assembly of mesoscopic and macroscopic components", PNAS (2002) 99 8 4768-4774

2. S.H. Kang, B. Pokroy, L. Mahadevan, and J. Aizenberg, "Control of Shape and Size of Nanopillar Assembly by Adhesion-Mediated Elastocapillary Interaction", ACS Nano 4 11 6323-6331