# Difference between revisions of "Contact angle"

Edited by Pichet Adstamongkonkul, AP225, Fall 2011

## Introduction

The contact angle is a quantitative measure of the wettability of the surface, represented by the angle at which a liquid or vapor interface makes with a solid surface.[1] The angle is specific and determined by the interactions across the three interfaces. Typically, the contact angle is illustrated by a drop of liquid on the surface. The shape of the drop is governed by the Young-Laplace equation (contact angle is incorporated as a boundary condition of the equation.) Normally, the contact angle can be measured using the so-calledgoniometer.[2]

 The contact angle is independent of geometry and hence a material property. Recent publications on contact angles on deformable surfaces can be included.


## Connection to Capillarity/Wettability

The figure (from the lecture) illustrated different contact angles corresponding to different wettability of the surface, which depends on the relative hydrophobicity/ hydrophilicity of the surface compared to the liquid. Conventionally, the contact angle is measured as the angle between the solid surface and the liquid drop surface. In other words, the contact angle is the angle between the solid-liquid interfacial (surface) force (denoted as gamma_SL) and the surface tension or the liquid-vapor interfacial force (denoted as gamma_LG). The larger the angle, the more the drop is repelled from the surface, indicating a relatively higher hydrophobicity of the surface, in the case of water drop.

If the liquid strongly attracts to the surface, the drop of the liquid would spread out on the solid surface. On highly hydrophobic surfaces, the contact angle can be as big as $-120^o$. However, materials with high degree of roughness on the surface can increase the angle up to $-150^o$; the materials in this group are called superhydrophobic surfaces.[2]

From the surface tensions at all three interfaces, we can explicitly write the Young equation that the system must satisfy at equilibrium:

$0=\gamma_{SG}-\gamma_{SL}-\gamma_{LG}cos(\theta_c)$ where $\theta_c$ is the contact angle.[3]

In the capillary effect, the driving force that causes water to go up the capillary is the net surface tension, balancing between the solid-vapor interfacial tension that pulls in the upward direction , and the solid-liquid interfacial tension that pulls downward.

 This is commonly stated but is incorrect. The Young-Dupre equation resolves all the inbalances in energy - no unresolved force is left to cause a lift. Capillary rise is due to Laplace pressures.


Examples of surfaces where the contact angles play an important role:

• Lotus leaf: superhydrophobic surface that causes the water droplet to roll over the surface without “wetting” the surface.[4]

• Human cornea: an extremely hydrophobic surface and, together with hydrophilic tears, maintain the lachrymal layer.
• Modified surfaces with enhanced hydrophilicity, via plasma treatment
This entry needs references to advancing and receding contact angles.


## Connection to Natural Systems

Whether or not a surface wets when it makes contact with water is important in many natural systems. One reason that it is important is that small insects can drown in small amount of water if the surface on which they live gets wet. This is especially important in insects that live in confined spaces such as aphids that live inside plant galls. These insects have had to develop adaptations that allow them to live in a small, enclosed space without drowning or becoming sick from the wate that they produce. In order to protect themselves they coat the interior of the gall with a waxy substance that makes the surface very hydrophobic and allows the waste drops to become coated in this same substance and form into enclosed marbles. [5]

The picture to the right shows:

a) a droplet of aphid waste (honeydew) on a smooth surface of aphid wax
b) The rough texture of the waxy surface that adds to the hydrophobicity
c) We see the waxy crystals coating the surface of one of these droplets
d) A view of the same droplet from above

## References

[1] Lecture on Capillarity and Wetting, AP225 Fall 2011

[2] Wikipedia contributors. “Contact angle.” Wikipedia, The Free Encyclopedia. 27 Nov 2011.

[3] Robert J. Good. “Contact angle, wetting, and adhesion: a critical review.” Journal of Adhesion Science and Technology. 6.12 (1992): 1269-302.

[4] Wikipedia contributors. “Lotus Leaf.” Wikipedia, The Free Encyclopedia. 27 Nov 2011.