Concentration of Magnetic Beads Utilizing Light-Induced Electro-Osmosis Flow

From Soft-Matter
Revision as of 19:32, 8 November 2011 by Yjin (Talk | contribs)

Jump to: navigation, search

Entry by Yuhang Jin, AP225 Fall 2011


Shih-Mo Yang, Punde Tushar Harishchandra, Tung-Ming Yu, Ming-Huei Liu, Long Hsu, and Cheng-Hsien Liu, IEEE Trans. Magn., 2011, 47, 2418.


electro-osmosis flow, light-induced dielectrophoresis, magnetic beads, TiOPc


Magnetic beads have wide applications in the separation of biomolecules. Traditional magnetic separation technology involves the use of bulk magnets, which makes scaling down of the device rather inefficient. Other techniques for the manipulation and separation of microparticles, such as optical tweezers and dielectrophoresis, are also limited in their flexibility. Therefore optoelectronic tweezers featuring light-induced method and nonuniform electric field were developed. The simplest design of an optoelectronic tweezer modulates the conductivity of amorphous silicon with dynamic light pattern and hence enables trapping and manipulation of particles. In addition, another approach of microparticle concentration via light-induced electro-osmosis flow was also reported. However, the chips required for those means are generally difficult to fabricate, impeding their convenient implementation in biology.

Previously, the authors presented an easier method for chip fabrication by using organic photoconductive material Y-type TiOPc for the light-induced electro-osmosis flow chip with a region of minimum flow velocity for the trapping and collection of magnetic beads. In this paper, they integrate the TiOPc-based substrate and the light-induced electro-osmosis flow (LEOF) phenomenon. The fabrication process in single and simple, the illumination light power is small, and the low-frequency kHz region for manipulating magnetic beads widens the scope of TiOPc-based optoelectronic dielectrophoresis chip. The device has been demonstrated to be capable of high-efficiency concentration and enrichment of magnetic microparticles.

Chip fabrication, system and theory

Fig.1 TiOPc-based LEOF chip. A thin TiOPc layer, blue color, is fabricated on ITO glass substrate with a simple fabrication process.
Fig.2 Optical system setup for on-chip manipulation of magnetic beads by LEOF.

The TiOPc-based LEOF is designed with simple fabrication process. TiOPc is spin-coated onto the ITO glass, yielding a thin TiOPc layer of 500 nm, whose properties remain stable under normal operation. An ITO glass is then placed on the TiOPc substrate with a 100 μm gap to obtain the TiOPc-based LEOF chip. The prototype chip is shown in Fig. 1.

The optical system of TiOPc-based LEOF chip is illustrated in Fig. 2. The light source is concentrated through a pair of focusing lenses and illuminated on the digital micromirror display (DMD). The reflecting image is projected on the TiOPc surface through a 1/20X optical system which consists of two lenses. The dynamic image is controlled by controlling the DMD surface in real time. An XYZ translation stage is utilized to tune the chip position and a function generator is used to provide external ac voltage. The microparticle manipulation process is recorded by a CCD.

For electro-osmosis flow, the force acting on a spherical particle of radius suspended in a medium with relative permittivity is given as

<math>F_{DEP}=2\pi\epsilon_m Re[f_{CW}(\omega)]\nabla E_{rms}^2</math>