Buckling of drying droplets of colloidal suspensions

From Soft-Matter
Revision as of 06:24, 23 February 2009 by Tkodger226 (Talk | contribs)

Jump to: navigation, search

Onset of Buckling in Drying Droplets of Colloidal Suspension

Authors: N. Tsapis, E. R. Dufresne, S. S. Sinha, C. S. Riera, J.W. Hutchinson, L. Mahadevan, and D. A. Weitz

Physical Review Letters 94, 018302 (2005)

Soft matter keywords

buckling, elastic shell, drying, sol-gel, Leidenfrost effect

By Tom Kodger

Abstract from the original paper

Minute concentrations of suspended particles can dramatically alter the behavior of a drying droplet. After a period of isotropic shrinkage, similar to droplets of a pure liquid, these droplets suddenly buckle like an elastic shell. While linear elasticity is able to describe the morphology of the buckled droplets, it fails to predict the onset of buckling. Instead, we find that buckling is coincident with a stress-induced fluid to solid transition in a shell of particles at a droplet’s surface, occurring when attractive capillary forces overcome stabilizing electrostatic forces between particles.

Practical Application of Research

Rapidly dried droplets which contain suspended colloids are found in several industrial areas, and probably in your home office (unless you use a laser printer). Spray drying where fine powders are made by the evaporation of aerosols have been used in the manufacture of foodstuffs, pharmaceuticals, polymers, and detergents.

Capillarity at Work

The authors use a water droplet with suspended colloidal particles, with no added ions; therefore the capillary length l= √(γ/ρ* g) ≈ 2.5mm at 100°C. To induce the evaporation the authors heat the droplet on a stainless steel surface uniformly heated to 200°C using the Leidenfrost effect (cerca 1756). This effect is familiar to anyone who has sprinkled water on a hot griddle to check the temperature where the fluid droplets do not wet the surfaces above about 150°C; rather they float on a thin layer of their own vapor.

File:209px-Leidenfrost droplet.svg

The droplets used are always less than the capillary length for water which ensures that they are spherical.

Using the well known Surface Evolver mathematical modelling program, the simulated buckling droplets nicely resemble the experimental drops. As the drops evaporate the relative thickness of the sheel can be determined using...